Turning your ideas into reality...
 

OUR PORTFOLIO

Non-Disclosure Agreements prevent us from showing all past projects, but here are some we can show!

 

 

X10 Baseball Filter Buddy
Bowl Beaver The Auto Stop
X Drives Talon Meters
Trail Beacon Protractor
Secure DNC  

 

X10 Baseball

X10 baseball is a new product from Titan Athletic Group designed to Build Power/Strength - Enhance Efficiency - Tune Muscle Memory. While similar training devices have been available for years, they all have problems. The X10 eliminates these problems. This great new product will help all players improve pitching, throwing, and batting.

 

Filter Buddy

Go green with Filter Buddy a unique product that reminds you to change your home or office air filter every 2, 4, or 6 weeks.  Simply set the timer when you install a new air filter, the unit will beep to let you know the timer has started.  When time is up a LED will flash and a beeper will sound every few minutes. A low cost simple product that can save money in electric bills and reduce wear on HVAC equipment.

Click here for more...

 

Bowl Beaver

The Bowl Beaver is a revolutionary design by inventor Bruce Anderson. This product creates a water tight seal for toilets, preventing floor damage and providing an early leak indication system. Using current industry standards coupled with sure innovation Bruce and BuildMyProduct.com designed and tested a product that promotes water conservation, and saves the home owner time and money in costly repairs.

Click here for more...

 

The Auto Stop

Auto-Stop will instantly and automatically turn an uncontrolled intersection into a controlled environment by displaying a stop sign affixed to a location close to the traffic signal. The sign can be mounted to any type of traffic signal configuration.

Click here for more...

 

X Drives Model B

The X Drives Model B is the premier boat motor control system from Alu-Marine / Pro-Trim. It utilizes two trolling motors, typically mounted on each side of the stern, to provide the ultimate in vessel control and overall boating experience.  The motors are controlled from a uniquely designed wireless controller that hooks onto your waistband or belt.  Versions are available for 12V, 24V, and 36V, trolling motor applications.  Installation takes only a few hours with standard tools.

 

X Drives Model C

The X Drives Model C is the latest in premier boat motor control systems from Alu-Marine / Pro-Trim. It utilizes two trolling motors, typically mounted on each side of the stern, to provide the ultimate in vessel control and overall boating experience.  The motors are controlled from a uniquely designed wireless controller that hooks onto your waistband or belt.  Versions are available for 12V, 24V, and 36V, trolling motor applications.  Installation takes only a few hours with standard tools.

 

X Drives Model D

Just like other X Drives systems two trolling motors are used to give the operator the ultimate in vessel control.  This system is similar to the X Drives system above but is designed specifically for use on small vessels such as john boats.  All electronics are integrated into a battery box making for a super compact package.  The user simply install the motors, plugs them into the battery box, turns the system on, and starts fishing.  With the mounts below, the user can be on the water fishing in minutes, even on rental boats.

 

Trolling Motor Mounts

Designed for use on John boats utilizing two motors, these are lightweight but still strong enough to withstand heavy duty use and abuse. To adjust the trolling motors the operator simply grabs the cushioned grip handle and gives the trigger a squeeze to position the motors anywhere from vertical to horizontal, even adjust toe in/out, its that easy. The mounts are easily attached with a smart integrated clamp design. Tested in fresh and saltwater, these mounts will hold up through years and years of use.

 

Talon Encoder Checker (UEC)

Test your Encoder with CONFIDENCE! The UEC is a custom instrument that is used to fully test Rotary or Linear Encoders and Digital Read-Outs in 5VDC, 12VDC, or 24VDC configurations. UEC applies a load to the Encoder output ensuring the test results are accurate. An O-Scope just shows the signals/pulses so the Encoder may look good on the bench but not work in the real world. UEC Detects the leading cause of Inaccurate motion.   

Click here for more...

 

Talon Variable Frequency Drive Analyzer (VFDA)

Variable Frequency Drive troubleshooting made Quick & Easy with a handheld instrument that is easy to use, even if you have never used a multi-meter before. Test Variable Frequency, Spindle, and Servo Drives. Compare Components, Circuits, Modules, and any other like devices. Test Transistors, IGBT's, FET's, Bi-Polar Junction Transistors, SCR's, Triac's, Resistors, Capacitors, Diodes, and more. 

Click here for more...

 

Talon Curve

A portable instrument that enables you to troubleshoot electronic equipment in a powered down state. Simply place the leads across a component and the meter will display a graph allowing you to identify the type and range of each component tested. A helpful capture feature allows you to quickly compare the current component in test to a like component that was previously tested.

Click here for more...

 

Hygienic Tooth Brush Holder

The Hygienic Toothbrush Holder is designed to keep up to four toothbrushes safe from contamination.  It can be placed on a counter top or wall mounted.  The removable spindle and plate design allows for easy cleaning.  Ventilation holes prevent mildew while still reducing contamination.

 

Trail Beacon

Never get lost again with this great product idea. Simply place these units every 100 feet or at marker points. When making your way back, you press a button and the unit will emit a light and/or tone that you can follow to find your way back to your starting point. Trail Beacons use a preprogrammed frequency that can be followed by search and rescue teams to locate the user in the case of emergencies. This compact device is great for hiking, cross country skiing, camping, search and rescue, and more...

 

Protractor

The protractor was designed and built for a large shipbuilder in Virginia who came to us requesting a unit that could display a measured angle in increments increasing from 0-180 degrees or decreasing from 180-0 degrees.  It also had to have an easy to read display, be thin, and last longer before needing batteries. They are less expensive than the protractors they were currently using.

 

VR2 - Vending Machine Controller

The VR2 is a water vending machine controller that we custom built for Aqua Bena.  Operation and setup are performed with an easy to use handheld programmer. The VR2's cost per unit is low because the same handheld programmer can be used on all VR2 controllers. The unit interfaces with all standard bill and coin collectors and produces a spreadsheet report for each location.

 

Secure DNC (Direct Numerical Control)

Run large programs on older CNC controls

Run sensitive programs. Great for Top Secret, & Government jobs.

Increase productivity by eliminating PC's in shop area.

File Encryption eliminates the possibility of programs getting into the wrong hands.

Click here for more...

 

TOTE-Alizer

The TOTE-Alizer is a custom unit that tracks material usage from 250 gallon totes and 55 gallon drums.  It saves time by tracking exactly how much material is remaining in  each container, how much material has been used, and when it is time to refill product. TOTE-Alizer saves money by providing the trends of material usage in automation lines allowing the user to adjust application as needed.

 

VOC Alert

The VOCalert is a device that has been used in manufacturing applications for over 12 years.  It announces a message recorded by the user when an input is triggered.  It monitors up to four inputs.  We have customers that use them on everything from assembly machine access doors to equipment monitoring and fault recognition devices.  They are great for existing and new applications alike.

 

 
My status